DZ47LED-LNE Residual Current Circuit Breaker 10A~60A
$14.00
Electrical Parameters Rated Current 10A, 15A, 20A, 25A, 30A, 40A, 50A, 60A Poles L+N+PE or L L PE Rated Voltage Ue AC 120V/240V Insulation Voltage Ui 500V Rated Breaking Capacity 6kA Over Voltage Protection Value 270V±5V Under Voltage Protection Value 90V±5V Rated Impulse Withstand Voltage (1.2/50) Uimp 4kV Dielectric Test...
Electrical Parameters
| Rated Current | 10A, 15A, 20A, 25A, 30A, 40A, 50A, 60A | |
| Poles | L+N+PE or L L PE | |
| Rated Voltage Ue | AC 120V/240V | |
| Insulation Voltage Ui | 500V | |
| Rated Breaking Capacity | 6kA | |
| Over Voltage Protection Value | 270V±5V | |
| Under Voltage Protection Value | 90V±5V | |
| Rated Impulse Withstand Voltage (1.2/50) Uimp | 4kV | |
| Dielectric Test Voltage At And Ind. Freq. For 1min | 2kV | |
| Residual Current Working Type | Type A | |
| Residual Leakage Tripping Current | 30mA/100mA/300mA | |
| Thermo-Magnetic Release Characteristic | C-Curve (5-10In) | |
| Electrical Life | 4000 | |
| Mechanical Life | 10000 | |
| Installation | 35MM Din Rail or M3 Screw Side Mount | |
| Reference Temperature For Setting Of thermal Element | 30℃ | |
| Ambient Temperature | -5℃~+40℃ | |
| Terminal Connection Type | Phillips Screws | |
| Adapter Cable | 6-63A 1.5-16mm² 16-5AWG | |
| Tightening Torque | 2.0N.M | |
| Altitude | 2000M | |
| Surge Protection Parameters | ||
| Max Discharge Current In 8/20μs | 10kA | |
| Response Time | <25ns | |
| The ground terminal links the stranded copper conductors | 6mm² | |
| RCD Types | ||
| Type AC General Purpose Use |
 |
RCD can detect and respond to AC sinusoidal wave only. |
| Type A Equipment incorporating electronic components |
 |
RCD can detect and respond as for type AC, Plus pulsating DC conponents. |
Description Of Appearance
1. Before use, you need to press the 
Button, and then hand up 
, power on. (power indicator red, LED red light, green light)
2. If you do not press the button before use, the 
will trip, automatically fall, the circuit cannot be connected.
3. The circuit is not connected, button 
can not work.
4. After connecting the circuit, press the button, open the upward, switch on the power, press the button, the circuit is disconnected, indicating that the leakage circuit is normal.
The Main Difference Between Type A And Type AC
| Form | Residual Current and Current Waveform that can trip | Trip Current Range | |
| Type AC | AC Residual Current |  |
0.5I△-I△n |
| Type A | AC Residual Current | |
0.5I△-I△n |
| Pulsating DC Residual Current |  |
0.35~1.4I△n (or 2I△n)(Current lag Angle 0°) 0.25~1.4I△n (or 2I△n)(Current lag Angle 90°) 0.11~1.4I△n (or 2I△n)(Current lag Angle 135°) |
|
| Current Stacking 6mA Pulsating Direct Current |  |
1.4I△n (or 2I△n) + 6mA | |
Installation Instructions
Dimensions And Accessories
Wring Instructions
